Sun Microsystems 3900, 6900 manual Using UNIX Commands, Solaris Handbook for Sun Peripherals

Chapter 6 provides information on host device troubleshooting.

Chapter 7 provides information on troubleshooting a Sun StorEdge Network FC switch-8 and switch-16 switch device.

Chapter 8 describes how to troubleshoot the Sun StorEdge T3+ array devices. Also included in this chapter is information about the Explorer Data Collection Utility.

Chapter 9 provides detailed information for troubleshooting the virtualization engines.

Chapter 10 describes how to troubleshoot using Microsoft Windows 2000. It also explains how to launch the Sun StorEdge T3+ Array Failover Driver GUI and interpret the multipath configurator.

Chapter 11 provides an example of fault isolation. It begins with how to discover an error and shows the user steps that are necessary for resolution.

Appendix A provides virtualization engine references, including Service Request Numbers (SRNs) and Simple Network Management Protocol (SNMP) Reference, an SRN/SNMP single point-of-failure table, and port communication and service code tables.

Appendix B provides a list of SUNWsecfg(1M) error messages and recommendations for corrective action.

Using UNIX Commands

This document may not contain information on basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices.

See one or more of the following documents for this information:

■Solaris Handbook for Sun Peripherals

■AnswerBook2™ online documentation for the Solaris™ operating environment

■Other software documentation that you received with your system

XVI Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003

Sun Proprietary/Confidential: Internal Use Only