Sun Microsystems 3900, 6900 manual Sun Proprietary/Confidential Internal Use Only

TABLE 7-2lists the switch events for Sun StorEdge network FC switch-8 and switch- 16 2 Gbit switches.

TABLE 7-2Storage Automated Diagnostic Environment Event Grid for 2 GBit Switches

Component					Note: Text within quotation marks (“ “) is exactly as it appears on the Event Grid.
	EventType	Severity	Action	Description		Action Required
chassis.	Alarm-	Yellow	Y	“chassis.fan.1 status		None.
fan				changed from OK”
chassis.	Alarm-	Yellow	Y	The uptime of the switch		1. Check to see if the switch
board				was less than the previous		has been reset.
				uptime of the switch. This		2. Check the power going
				could indicate that the		to the switch.
				switch has been reset either
				by a user or by the loss of
				power.
chassis.	Alarm	Yellow		“chassis.power.1 status		None.
power				changed from OK”
				This event monitors
				changes in the status of the
				chassis’ power supply, as
				reported by the SANbox
				chassis status.
system_	Alarm	Yellow		“Switch sw1a was rezoned”
reboot
				This event reports changes
				in the zoning of a switch.
enclosure	Audit			“Auditing a new switch
				called ras	d2-swb1
				(ip=xxx.0.0.41)
				10002000007a609”
oob	Comm_			“Communication regained
	Established			with sw1a
				(ip=xxx.20.67.213)”

82 Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003

Sun Proprietary/Confidential: Internal Use Only