Sun Microsystems 6900, 3900 Other Error Messages, Sun Proprietary/Confidential Internal Use Only

Other Error Messages

TABLE B-4Other SUNWsecfg Error Messages

Source of Error Message	Cause of Error Message	Suggested Corrective Action
Common to all	If the Sun StorEdge 3900 or 6900	Set the BOXTYPE variable as
components	series has more than two failures	follows:
	(for example, both virtualization	BOXTYPE=6910; export BOXTYPE
	engines and two switches are
	down), the getcabinet tool might
	not determine the correct cabinet
	type. In this example, the
	getcabinet command might
	determine the device to be a Sun
	StorEdge 3900 series when, in
	reality, it is a Sun StorEdge 6900
	series.
checkdefaultconfig	• Could not determine the Sun	To use the command line interface
	StorEdge system type.	(CLI), set the BOXTYPE
	• Multiple components might be	environment variable to one of the
	down and the getcabinet	seven values.
	command could not determine the
	Sun StorEdge series type (3910,	For example, BOXTYPE=3910;
	3960, 6910, or 6960).	export BOXTYPE.
listavailable	• The component is unavailable. It	If no other commands are running
	is either not found or the	and you believe the configuration
	configuration lock is set.	lock might be set in error, run the
	• The components are down (they	removelocks command.
	do not respond to a ping).
	• Another SUNWsecfg command
	is running and is updating the
	configuration (ps -ef).
setdefaultconfig	The system could not determine the	To use the command line interface
	Sun StorEdge system type.	(CLI), set the BOXTYPE
		environment variable to one of the
		four values.
		For example, BOXTYPE=3910;
		export BOXTYPE.

Appendix B Configuration Utility Error Messages 175

Sun Proprietary/Confidential: Internal Use Only