Sun Microsystems 6900, 3900 manual Sun Proprietary/Confidential Internal Use Only

TABLE B-1Virtualization Engine Error Messages (Continued)

Source of Error Message	Cause of Error Message	Suggested Corrective Action
restorevemap	• The import zone data failed.	1.	Check the status of both
	• The restore physical and logical		virtualization engines.
	data failed.	2.	If an error condition exists, refer
	• The restore zone data failed.		to Appendix A for corrective
			action.
		3.	Run the restorevemap
			command again.
setdefaultconfig	• The virtualization engine is unable	1.	Check the status of the
	to properly configure the		virtualization engine and reset, if
	virtualization engine host		necessary.
	${vehost}.	2.	Run the setdefaultconfig
	• The virtualization engine cannot		command again.
	continue the configuration of other
	components.
setdefaultconfig	The setupve(1M) command failed.	1.	Run setupve -n ve_hostname
			-v(verbose mode).
		2.	Check the errors.
		3.	Run checkve -n
			ve_hostname.
		You can continue to configure
		VLUNs and zones only if both of
		these commands work.

Appendix B Configuration Utility Error Messages 167

Sun Proprietary/Confidential: Internal Use Only