The Admin Tab

The Admin Tab allows to change the device's system configurations.

Access point name:

With this unque name, the AP can be found easily via

 

Wireless Nevigator Utility. It can be the nickname assigned

 

by the adminstrator.

User name:

This is the name used for login into the AP's built Web User

 

Interface.

Administrator password:

Please key the same password in both columns, then click

 

"Save" to validate the new password

Commands

 

Reboot access point:

When any setting was changed, the AP MUST be reboot so

 

that the change can be confirmed.

Reset to factory defaults:

This option will ERASE all the current settings, and return

 

back to the factory defaults.

Note: Click button "Save" to store the settings. The settings will work after AP automatically reboots.

The Help Tab

The Help Tab displays the explanations of each setting shown in above seven tabs.Please click those hyperlinks in right side, and then it will direct you the meaning of each setting.

Rev. 1 - YML668

www.netcomm.com.au

NP5400 11g Wireless Access Point User Guide

Page 21

Page 21
Image 21
NetComm NP5400 manual Admin Tab, Help Tab, Commands