The IP Address Tab
The IP Address Tab displays IP settings options on this AP.
IP Address Mode: | Select "Static" or "DHCP" mode. For "Static" mode, the IP |
| address settings are given by user. For "DHCP" mode, these |
| settings will be overridden by a DHCP server on your |
| network. The default setting is "Static" |
Default IP Address: | The static IP address you want to assign to the AP. The |
| default value is "192.168.1.100". |
Default subnet mask: | The subnet mask you want to assign for the AP. The default |
| value is "255.255.255.0". |
Default gateway: | The internet gateway you want to assign for the AP. The |
| default value is "192.168.1.1". |
Access point name: | With the name, the AP can be found easily via Wireless |
| Nevigator Utility. It can be the nickname assigned by the |
| adminstrator. |
Note: Click button "Save" to store the settings. The settings will work after AP automatically reboots.
www.netcomm.com.au | Rev. 1 - YML668 |
Page 20 | NP5400 11g Wireless Access Point User Guide |
