The Info Tab
The Info Tab displays the current AP settings.
Access Point Information |
|
Access point name: | Displays current device name of the AP. You also can change |
| the name. |
MAC address of AP: | Displays the unique fMAC number burned into this AP that |
| identifies itself from other Ethernet devices |
Associated stations: | Displays the number of wireless client devices associated |
| with this AP. |
Wireless Firmware version: | Displays the version number of wireless LAN firmware |
| embedded in this AP. |
AP version: | Displays the version number of AP system firmware. |
Current IP settingsIP address: | Displays the current IP address of this AP. |
DHCP client: | Displays if this AP enable DHCP client feature or not. |
Current Wireless |
|
SettingsPerformance Mode: | Displays the AP is set in Maximum interoperability mode or |
| Maximum performance mode. |
Wireless network name (SSID): | Displays current SSID of the AP. Please make sure that |
| your wireless LAN is working properly under the effective |
| reach range of the AP |
WEP: | Displays the WEP function is enabled or disabled. |
www.netcomm.com.au | Rev. 1 - YML668 |
Page 16 | NP5400 11g Wireless Access Point User Guide |
