5-13
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter5 Configuring the Client Adap ter Setting Security Parameters
If this profile is configured for use in an infrastructure network and you want to specify up to four ac cess
points to which the client adapter should attempt to associate, click Preferred APs. The Preferred
Access Points window appears (see Figure5-3).
Figure5-3 Preferred Access Points Window
Leave the Access Point 1 through Access Point 4 fields blank or enter the MAC addresses of up to four
preferred access points to which the client adapter can associate; then click OK. (The MAC address
should consist of 12 hexadecimal characters.) If the specified access points are not found or the client
adapter roams out of range, the adapter may associate to another access point.
Go to the next section to set additional parameters or click OK to save your changes and return to the
Cisco Aironet Desktop Utility (Profile Management) window.
Setting Security Parameters
The Profile Management (Security) window (see Figure 5-4) enables you to set parameters that control
how the client adapter associates to an access point, authenticates to the wireless netw o r k, an d encr y pts
and decrypts data. To access this window, click the Security tab from any Profile Management window.