8-11
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter8 Using the Aironet Sys tem T ray Utility (ASTU) Pop-Up Menu
Link Quality The client adapter’s signal strength for all received packets.
Valu e: Excellent, Good, Fair, Poor, or No Link
SSID The name of the network to which your client adapter is currently
associated.
Note Refer to the SSID1 parameter in Table 5- 2 for information on
setting the client adapter’s SSID.
Access Point Name The name of the access point to which your client adapter is associated.
It is shown only if the client adapter is in infrastructure mode, the
access point was configured with a name, and Aironet Extensions are
enabled (on access points running Cisco IOS Release 12.2(4)JA or
later).
Note This field shows up to 15 characters although the name of the
access point may be longer.
Access Point IP Address The IP address of the access point to which your client adapter is
associated. It is shown only if the client adapter is in infrastructure
mode, the access point was configured with an IP address, and Aironet
Extensions are enabled (on access points running Cisco IOS Release
12.2(4)JA or later).
Note If Aironet Extensions are disabled, the IP address of the
associated access point is shown as 0.0.0.0.
Current Receive Rate The rate at which your client adapter is currently receiving data
packets.
Valu e: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps
Current Transmit Rate The rate at which your client adapter is currently transmitting data
packets.
Valu e: 1, 2, 5.5, 6, 9, 11, 12, 18, 2 4, 36, 4 8, or 5 4 M bp s
Client Adapter IP Address The IP address of your client adapter.
Table8-3 Connection Status Window Elements (continued)
Status Element Description