Cisco Systems CB21AG manual Enabling EAP-TLS, Define Certificate Window

Chapter 5 Configuring the Client Adapter

Setting Security Parameters

Enabling EAP-TLS

Follow the steps below to enable EAP-TLS authentication for this profile.

Step 1 Perform one of the following on the Profile Management (Security) window:

•If you want to enable EAP-TLS without WPA or WPA2, choose 802.1x under Set Security Options and EAP-TLSin the 802.1x EAP Type drop-down box.

•If you want to enable EAP-TLS with WPA or WPA2, choose WPA/WPA2/CCKM under Set Security Options and EAP-TLSin the WPA/WPA2/CCKM EAP Type drop-down box.

Note If you want to enable CCKM on the client adapter, you must choose the WPA/WPA2/CCKM security option, regardless of whether you want the adapter to use WPA or WPA2. The configuration of the access point to which your client adapter associates determines whether CCKM will be used with 802.1x, WPA, or WPA2.

Note Refer to the “WPA and WPA2” section on page 5-18for additional information.

Step 2 Click Configure. The Define Certificate window appears (see Figure 5-12).

Figure 5-12 Define Certificate Window

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

5-40 OL-4211-03