Cisco Systems CB21AG manual Enabling EAP-TLS Authentication

Appendix E Configuring the Client Adapter through the Windows XP Operating System

Configuring the Client Adapter

Step 15 Perform one of the following if you are planning to use EAP authentication:

•If you are planning to use EAP-TLS authentication, follow the instructions in the “Enabling EAP-TLS Authentication” section on page E-10.

•If you are planning to use PEAP authentication, follow the instructions in the “Enabling PEAP Authentication” section on page E-13.

Enabling EAP-TLS Authentication

Follow the steps below to prepare the client adapter to use EAP-TLS authentication, provided you have completed the initial configuration.

Step 1 Click the Authentication tab on the Wireless Network Properties window. The following window appears (see Figure E-3).

Figure E-3 Wireless Network Properties Window (Authentication Tab)

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

E-10 OL-4211-03