Cisco Systems CB21AG manual Configuring the Client Adapter

Appendix E Configuring the Client Adapter through the Windows XP Operating System

Configuring the Client Adapter

Figure E-1 Wireless Network Connection Properties Window (Wireless Networks Tab)

Step 6 Make sure that the Use Windows to configure my wireless network settings check box is checked.

Step 7 Choose the SSID of the access point to which you want the client adapter to associate from the list of available networks and click Configure. If the SSID of the access point you want to use is not listed or you are planning to operate the client adapter in an ad hoc network (a computer-to-computer network without access points), click Add.

Note The Allow Broadcast SSID to Associate option on the access point must be enabled for the SSID to appear in the list of available networks.

The Wireless Network Properties window appears (see Figure E-2).

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

E-6 OL-4211-03