Chapter 4 Using the Profile Manager

Creating a New Profile

Figure 4-3 Profile Management (General) Window

Note If you are creating a profile after scanning for an available network, the SSID of the network appears in the SSID1 field.

Step 5 Perform one of the following:

If you want this profile to use the default values, click OK. The profile is added to the profiles list on the Cisco Aironet Desktop Utility (Profile Management) window.

If you want to change any of the configuration parameter settings, follow the instructions in Chapter 5. The profile is added to the profiles list on the Cisco Aironet Desktop Utility (Profile Management) window.

Note The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore, you must always insert your PC-Cardbus card into the same slot, create profiles for both slots, or export the profiles from one slot and import them for the other slot.

Step 6 Go to the “Including a Profile in Auto Profile Selection” section on page 4-7to enable the profile to be selected automatically or go to the “Selecting the Active Profile” section on page 4-9to activate the profile.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

4-6

OL-4211-03

 

 

Page 60
Image 60
Cisco Systems CB21AG manual Profile Management General Window