3-19
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter3 Installing the Client Ad apter Installing the Client Adapter Software
Step25 Check the Enable Cisco Aironet System Tray Utility (ASTU) check box if you want to be able to use
ASTU even though you have chosen to configure your client adapter throug h a t hird- part y tool in stea d
of ADU and click Next.
Step26 When prompted to insert your client adapter, click OK. The Setup Status window appears (see
Figure 3-17).
Figure3-17 Setup Status Window
The installation process begins, and you are notified as each software component is installed.
Step27 When a message appears indicating that your computer needs to be rebooted , cl ick OK and all ow your
computer to restart.
Step28 If the Windows Found New Hardware Wizard appears after your computer reboots, click Next, allow the
wizard to install the software for the client adapter, and click Finish.
Step29 If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps
for your operating system.
•Windows 2000
a. Double-click My Computer, Control Panel, and Network and Dial-up Connections.
b. Right-click Local Area Connection x (where x represents the number of the connection).
c. Click Properties.
d. In the Components Checked Are Used by This Connection field, clic k Int ernet P rotocol
(TCP/IP) and Properties.