Physical Specifications, Esd | Cisco Systems CB21AG specification

Appendix A Technical Specifications

Table A-1lists the technical specifications for the Cisco Aironet CB21AG and PI21AG Wireless LAN Client Adapters.

Table A-1	Technical Specifications for CB21AG and PI21AG Client Adapters

Physical Specifications

Size

PC-Cardbus card		4.5 in. L x 2.1 in. W x 0.2 in. H
		(11.3 cm L x 5.4 cm W x 0.5 cm H)

PCI card

Standard PCI card		4.7 in. L x 0.7 in. W x 4.8 in. H
		(12 cm L x 1.8 cm W x 12.1 cm H)

Low-profile PCI card		4.7 in. L x 0.7 in. W x 3.1 in. H
		(12 cm L x 1.8 cm W x 7.9 cm H)

Weight

PC-Cardbus card		1.55 oz (44 g)

PCI card

Standard PCI card		3.6 oz (103 g)
with antenna

Standard PCI card		1.9 oz (55 g)
without antenna

Low-profile PCI card		3.5 oz (98 g)
with antenna

Low-profile PCI card		1.7 oz (49 g)
without antenna

Enclosure

PC-Cardbus card		Type II Cardbus

PCI card		Standard or low-profile Type II PCI

Connector

PC-Cardbus card		68-pin Cardbus

PCI card		62-pin PCI

Status indicators		Green and amber LEDs; see Chapter 10

Operating temperature		32oF to 158oF (0oC to 70oC)
Storage temperature		32oF to 185oF (0oC to 85oC)
Humidity (non-operational)		90% relative humidity

ESD		15 kV (human body model)

Radio Specifications

Type

802.11a		Orthogonal frequency division multiplexing (OFDM)

802.11b/g		Direct-sequence spread spectrum (DSSS) and orthogonal frequency
		division multiplexing (OFDM)

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

	A-2	OL-4211-03

Image 202

Cisco Systems CB21AG manual Physical Specifications, Esd, KV human body model, Radio Specifications

Contents

Corporate Headquarters Customer Order Number Text Part Number OL-4211-03 Copyright 2005 Cisco Systems, Inc All rights reserved N T E N T S Iii Assembling the Antenna Overview Pop-Up Menu Help Exit Select Profile Vii Antenna Installation Warning B-3 Viii WPA OL-4211-03 Preface Following topics are covered in this section Organization AudiencePurpose Xii Conventions Xiii Xiv Cisco.com Related PublicationsObtaining Documentation Documentation DVD Documentation Feedback Cisco Product Security OverviewOrdering Documentation Xvi Cisco Technical Support Website Reporting Security Problems in Cisco ProductsObtaining Technical Assistance An emergency, you can also reach Psirt by telephone 877 408 Definitions of Service Request Severity Submitting a Service RequestXviii Obtaining Additional Publications and Information Xix OL-4211-03 Product Overview Client Adapter Model Number Description Introduction to the Client AdaptersTerminology AIR-CB21AG Radio Antenna Hardware ComponentsRadio LEDs Driver Software ComponentsClient Utilities Network Configurations Using Client Adapters Ad Hoc Wireless LAN Access Point Root Unit Wired LAN Preparing for Installation FCC Safety Compliance Statement Safety informationSafety Guidelines Package Contents Unpacking the Client Adapter System Requirements For Infrastructure Devices Site RequirementsFor Client Devices OL-4211-03 Installing the Client Adapter Inserting a Client Adapter Inserting a PC-Cardbus Card Changing the Bracket Inserting a PCI CardBracket screws Inserting the Card Assembling the Antenna Inserting a PCI Card into a PC Mounting the Antenna Inserting the Antenna into Its Base Bottom of Antenna Base Mounting the Antenna Installing the Client Adapter Software Preparing Setup Window Click Next. The Setup Type window appears see Figure Cisco Aironet Installation Program Window 10 Setup Type Window 11 Install Cisco Aironet Site Survey Utility Window 12 Choose Destination Location Window 13 Select Program Folder Window 14 Important Please Read! Window Feature 15 Choose Configuration Tool Window Security Static WEP Yes Leap or EAP-FAST authenticationWith dynamic WEP EAP-TLS or Peap authentication Yes Receive Click Properties Installing a Microsoft Hot Fix for Group Policy Delay Page OL-4211-03 Using the Profile Manager Overview of Profile Manager Opening Profile Manager SSID2 Field DescriptionSSID1 SSID3 Creating a New Profile Available Infrastructure and Ad Hoc Networks Window SNR Profile Management General Window Including a Profile in Auto Profile Selection Auto Profile Selection Management Window OL-4211-03 Selecting the Active Profile Editing a Profile Modifying a ProfileImporting and Exporting Profiles Deleting a Profile Importing a Profile Exporting a Profile Export Profile Window Configuring the Client Adapter Overview Parameter Category Number Setting General Parameters Parameter Description Client adapter to roam to that network without having to be ReconfiguredAuto profile selection or configured for use in an ad hoc Auto profile selection Setting Advanced Parameters Profile Management Advanced Window Radio Band Transmit Power Level Profile Management Advanced Parameters Network Type Description Parameter Description Parameter Description Default Open Setting Security Parameters Preferred Access Points Window Overview of Security Features Profile Management Security Window Static WEP Keys EAP with Dynamic WEP Keys Configuring the Client Adapter Setting Security Parameters LEAP, EAP-FAST, EAP-TLS, Peap EAP-GTC, or Peap EAP-MSCHAP V2, WPA and WPA2 Cckm Fast Secure Roaming Reporting Access Points that Fail Leap Authentication Security Feature Client Setting Access Point Setting Synchronizing Security FeaturesAdditional WEP Key Security Features Ssid WPA Security Feature Client Setting Access Point Setting WPA/WPA2/CCKM LEAP, EAP-FAST, EAP-TLSOr later, choose a cipher suite that is MIC Peap EAP-MSCHAP Enabling Static WEPTkip Interval to any value other than Configuring the Client Adapter Setting Security Parameters Enabling WPA/WPA2 Passphrase Define WPA/WPA2 Pre-Shared Key Window Enabling Leap Leap Settings Window Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Enabling EAP-FAST EAP-FAST Settings Window Configuring the Client Adapter Setting Security Parameters Click Select More Select EAP-FAST PAC Window 10 Import EAP-FAST PAC File Window Configuring the Client Adapter Setting Security Parameters Deleting a Manually Provisioned PAC File Enabling EAP-TLS or Peap Enabling EAP-TLS 12 Define Certificate Window Configuring the Client Adapter Setting Security Parameters Enabling Peap EAP-GTC 13 Define Peap EAP-GTC Configuration Window 14 Configuration Settings Window Configuring the Client Adapter Setting Security Parameters 15 Define Peap EAP-MSCHAP V2 Configuration Window Enabling Peap EAP-MSCHAP 16 Configuration Settings Window Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Configuring the Client Adapter Setting Security Parameters Disabling Static WEP, WPA/WPA2 Passphrase, or EAP Enabling Wi-Fi MultimediaEnabling the QoS Packet Scheduler on Windows 17 Wireless Cisco Connection Properties Window 18 Select Network Component Type Window Enabling the QoS Packet Scheduler on Windows XP Click Control Panel Double-clickNetwork Connections Setting Roaming Parameters in the Windows Control Panel Follow these steps to access the roaming parameters Wireless Mode Using EAP Authentication Using Leap or EAP-FAST Leap or EAP-FAST Authentication Status Window After Profile Activation or Card Insertion Stage Explanation After a Reboot or Logon After Your EAP-FAST Password Expires Using Leap or EAP-FAST with an Automatically Prompted Login Enter Wireless Network Password Window After Your EAP-FAST Password Expires Using Leap or EAP-FAST with a Manually Prompted Login After Profile Activation After a Reboot, Logon, or Card Insertion Action Drop-Down Menu After Your EAP-FAST Password Expires Using Leap or EAP-FAST with a Saved Username and Password Using EAP-TLS 10 Please Change Password Window Windows NT or 2000 Domain Databases or Ldap Databases Only Using Peap EAP-GTCOTP Databases Only Using Peap EAP-MSCHAP Restarting the Authentication Process OL-4211-03 Viewing Status and Statistics Status Statistics Overview of ADU Status and Statistics ToolsTool Number Displays the signal strength Signal-to-noise ratio as a percentage Viewing the Current Status of Your Client Adapter 3interprets each element of the Current Status window Status Description Status Description Details on these server-based authentication types 4interprets each element of the Advanced Status window Michael MIC is enabled and is being used with WPA and Tkip None MIC is disabledMIC is enabled and is being used with MMH WMM Status Description Status Description Cisco Aironet Desktop Utility Diagnostics Window Viewing Statistics for Your Client Adapter Statistic Description Advanced Statistics Window 6interprets each element of the Advanced Statistics window Ckip MIC OK Integrity check MIC value when Ckip was being usedPoint OL-4211-03 Using the Aironet System Tray Utility Astu Astu Icon Infrastructure mode or another client in ad hoc modeOverview of Astu Icon Description Tool Tip Window Status Element Description Connection Status Description Help This option enables you to access the online helpPop-Up Menu Following sections describe each Astu pop-up menu option Open Aironet Desktop Utility TroubleshootingExit Preferences Enable/Disable Radio Reauthenticate Manual LoginSelect Profile Show Connection Status Connection Status Window Connection Status Window Elements Ssid OL-4211-03 Routine Procedures Removing a PC-Cardbus Card Removing a Client AdapterRemoving a PCI Card Client Adapter Software Procedures Upgrading the Client Adapter Software Previous Installation Detected Window Choose Update the previous installation and click Next Uninstalling the Client Adapter Software Choose Uninstall the previous installation and click Next Opening ADU ADU ProceduresExiting ADU Finding the Version of ADU Viewing Client Adapter Information Refer to for instructions on using Astu Astu ProceduresAccessing Online Help Enabling or Disabling Your Client Adapter’s Radio OL-4211-03 Troubleshooting 10-1 Status LED green Activity LED amber Condition Accessing the Latest Troubleshooting InformationInterpreting the Indicator LEDs 10-2 Troubleshooting Information Number Troubleshooting the Client AdapterUsing the Troubleshooting Utility Diagnosing Your Client Adapter’s Operation Troubleshooting Utility Window 10-4 Troubleshooting Utility Window with Test Results 10-5 Troubleshooting Utility Window Detailed Report 10-6 Saving the Detailed Report to a Text File 10-7 Disabling the Microsoft 802.1X Supplicant Windows 2000 Only Client Adapter Recognition Problems10-8 Resolving Resource Conflicts in Windows Reboot your computerResolving Resource Conflicts 10-9 Resolving Resource Conflicts in Windows XP Problems Associating to an Access Point10-10 Parameters Missing from Profile Management Windows Problems Connecting to the NetworkPrioritizing Network Connections 10-11 Error Messages 10-12 10-13 10-14 10-15 10-16 10-17 10-18 10-19 10-20 10-21 10-22 10-23 10-24 Technical Specifications ESD Physical SpecificationsRadio Specifications KV human body model Appendix a Technical Specifications DBm @ 24 Mbps Receiver sensitivity 802.11aDBm @ 6, 9, 12, and 18 Mbps DBm @ 36 Mbps Indoor typical Outdoor typical Power Specifications Safety and Regulatory Compliance Specifications Translated Safety Warnings Explosive Device Proximity Warning Antenna Installation Warning Appendix B Translated Safety Warnings Appendix B Translated Safety Warnings Appendix B Translated Safety Warnings Declarations of Conformity and Regulatory Information Models AIR-CB21AG-A-K9, AIR-PI21AG-A-K9 USA Department of Communications Canada Canadian Compliance Statement OL-4211-03 Cisco Aironet CB21AG Wireless LAN Client Adapter Declaration of Conformity Statement Cisco Aironet PI21AG Wireless LAN Client Adapter Japanese Translation Declaration of Conformity for RF ExposureEnglish Translation English Translation 5-GHz Client AdaptersChinese Translation Communication ACT GHz Client Adapters This equipment is limited for indoor use OL-4211-03 Channels, Power Levels, and Antenna Gains Ieee 802.11a ChannelsRegulatory Domains Ieee 802.11b/g Data Rate Maximum Power Levels and Antenna GainsIeee 802.11b With 1-dBi Antenna Gain Ieee 802.11g Mbps 31.6 OL-4211-03 P E N D I X E Overview EAP with Dynamic WEP Keys WPA Configuring the Client Adapter Configuring the Client Adapter Page Configuring the Client Adapter Page Enabling EAP-TLS Authentication For EAP type, choose Smart Card or other Certificate Configuring the Client Adapter Enabling Peap Authentication Figure E-6 Protected EAP Properties Window Figure E-7 EAP MSCHAPv2 Properties Window Figure E-8 Peap Properties Window Figure E-9 Generic Token Card Properties Window Associating to an Access Point Using Windows XP Figure E-10 Wireless Network Connection Status Window Performing a Site Survey Guidelines Additional Information Opening the Site Survey Utility Selecting the Client Adapter Using the Associated AP Status Tab Specifying Display Units Viewing the Access Point’s Status Table F-1 Site Survey Utility Associated AP Status Description Using the AP Scan List Tab Viewing the AP Scan List Figure F-5 Site Survey Utility AP Scan List Rssi CCX Pausing the AP Scan ListValue 1, 2, 3, or Viewing AP Details Access point’s wireless networkDetailed Information Parameter Description Rssi Generating an AP Scan Log File Figure F-7 Site Survey Utility Log File Finding the Version of the Site Survey Utility Accessing Online HelpUninstalling the Site Survey Utility Exiting the Site Survey UtilityPage Standard Wireless network composed of stations without access pointsStations Set of characters that contains both letters and numbers GL-2 Setting must be within the range of 64 to 2312 bytes GL-3 Ethernet 802.3 and wireless LAN 802.11 specifications GL-4 GL-5 GL-6 802.1X for authenticated key management Computing device with an installed client adapterProtection and 802.1X for authenticated key management GL-7 GL-8 Selecting in ADU Authentication Mode parameterIN-1 Selecting the active profile Pausing ViewingADU IN-2 CAM AstuIN-3 FCC C-2 ADU Windows XPData encryption ADU Site survey utility IN-4 IN-5 ACK CTS CRCFCC RTS IN-7 Status With Leap Modify button Disabling EnablingMMH MIC IN-8 IN-9 IN-10 IN-11 IN-12 Setting Viewing ADU Regulatory compliance Safety Spread spectrumIN-13 With test results Third-party tool, enabling in Install WizardInitial window IN-14 Security features IN-15 IN-16