Cisco Systems CB21AG manual Using Leap or EAP-FAST with a Manually Prompted Login

Chapter 6 Using EAP Authentication

Using LEAP or EAP-FAST with a Manually Prompted Login

Figure 6-5 Please Change Password Window

Step 2 Enter your new password in both the New Password and Verify New Password fields.

Step 3 Click OK. The client adapter should authenticate using your new password.

Using LEAP or EAP-FAST with a Manually Prompted Login

After Profile Activation

After you (or auto profile selection) activate a profile that uses LEAP or EAP-FAST authentication with a manually prompted login, follow these steps to authenticate.

Note If auto profile selection is enabled, this procedure is applicable the first time auto profile selection activates a manual LEAP or manual EAP-FAST profile. After you follow these steps to enter your LEAP or EAP-FAST credentials, you can switch profiles without having to re-enter your credentials until you reboot your computer, eject and reinsert your client adapter, or change the profile in any way (including its priority in auto profile selection). If auto profile selection is disabled, you must re-enter your credentials every time you activate a manual LEAP or manual EAP-FAST profile.

Step 1 When the Enter Wireless Network Password window appears (see Figure 6-6), enter your LEAP or EAP-FAST username and password and click OK. The domain name can be entered in the Log On To field; it is optional.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

6-8 OL-4211-03