Chapter 6 Using EAP Authentication

Using LEAP or EAP-FAST with a Manually Prompted Login

The LEAP or EAP-FAST Authentication Status window appears.

Step 4 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision a PAC, click Yes.

Step 5 If your client adapter authenticates, the window shows that each stage was successful and then disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.

If the authentication attempt fails, an error message appears after the authentication timeout period has expired. Refer to the “Error Messages” section on page 10-12for the necessary action to take.

After Your EAP-FAST Password Expires

If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to change your password.

Step 1 When the Please Change Password window appears (see Figure 6-9) to indicate that your password is invalid, enter your old password in the Old Password field.

Figure 6-9 Please Change Password Window

Step 2 Enter your new password in both the New Password and Verify New Password fields.

Step 3 Click OK. The client adapter should authenticate using your new password.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

 

OL-4211-03

6-11

 

 

 

Page 133
Image 133
Cisco Systems CB21AG manual After Your EAP-FAST Password Expires