Panasonic FW100NTU Security menu, Input Password, Password Change, Text Display, Text Change

SECURITY menu

Remote control Control panel

See “Navigating through the MENU” on page 27. See “Main menu and Sub-menu” on page 28.

Entering the SECURITY menu

Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.

PICTURE	INPUT PASSWORD	OFF
POSITION
	PASSWORD CHANGE
LANGUAGE
	TEXT DISPLAY	OFF
OPTION
	TEXT CHANGE
SECURITY
NETWORK
RETURN	PASSWORD
SELECT
ENTER

When you apply to the SECURITY menu before you change the password to your original, perform to input the following factory default password operation.

Press F H G I F H G I and ENTER.

After you change the password

When you apply to the SECURITY menu after you change the password to your original in the PASSWORD CHANGE menu, input the original password operation.

NOTE:

•The factory default password is valid until you change the password in PASSWORD CHANGE menu.

•The entered password operations will appear as asterisks in the box.

INPUT PASSWORD

You can activate the security system and the password operation will be asked to perform when the projecting mode started. Unless you perform the correct password operation, all of the button controls will be disabled except the POWER button.

OFF	Deactive
ON	Active

PASSWORD CHANGE

You can change the password operation to your original.

1.Press a series of button operation up to 8 as a password by using F G I and H buttons.

2.Press ENTER.

3.Press the exact same series of button operation you entered in the NEW password box for confirmation.

If a series of button operation is incorrect, you will be asked to perform again.

4.Press ENTER.

NOTE:

•The entered password operations will appear as asterisks in the box.

TEXT DISPLAY

You can set your original text, such as company name or URL information, to display regularly at the bottom of the projected image while projecting.

OFF	Deactive
ON	Active

TEXT CHANGE

You can enter your original text up to 22 characters for

TEXT DISPLAY.

TEXT CHANGE

		DELETE
OK	CANCEL	Settings

1.Use F G I H to specify the location of the required character.

2.Press ENTER.

The selected character will be displayed in the TEXT CHANGE box.

3. Repeat until finish your original text.

Select DELETE to delete the last entered character and press ENTER.

4.Select OK and press ENTER to set the entered text.

Select CANCEL or press MENU/RETURN buttons to return to the previous menu.

NOTE:

•When you activated the security system, make sure to change the password to your original for safety.

•The factory default password is valid until you change the password in PASSWORD CHANGE menu.

ENGLISH - 37