Technical Information
ENGLISH - 47
Appendix
You can remotely operate the projector from the outside the Remote control range by connecting to the REMOTE
terminal.

JPin assignments and signal names

JLAMP switching

JSwitching input signals

REMOTE terminal
Pin No. Signal name Contents
AGND Ground
BPOWER POWER ON
CINPUT SEL3 Select input signal 3
DNC
EINPUT SEL1 Select input signal 1
FINPUT SEL2 Select input signal 2
GConnect internally
H
IENABLE Control by external contact
Pin No. Settings
B - AShort Open
Operation On Off
Pin No. Settings
C - AOpen Open Short Short Short Open
E - AOpen Short Open Open Short Short
F - AOpen Open Short Open Open Short
Input signal COMPUTER1 COMPUTER2 COMPONENT VIDEO S-VIDEO NETWORK
NOTE:
When pin A and pin I are short-circuited, the buttons on the projector’s control panel, POWER and INPUT SELECT
buttons on the Remote control cannot be used. In addition, the RS-232C commands and network functions that
correspond to these functions cannot be used either.
While pin I is “Open”, do not short-circuit pin A, B, C, E and F. The projector would reject all the signals from the
Remote control.