Cisco Systems CB21AG manual Enter Wireless Network Password Window

Chapter 6 Using EAP Authentication

Using LEAP or EAP-FAST with an Automatically Prompted Login

Figure 6-3 Enter Wireless Network Password Window

The LEAP or EAP-FAST Authentication Status window appears.

Step 2 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision a PAC, click Yes.

Step 3 If your client adapter authenticates, the LEAP or EAP -FAST Authentication Status window shows that each stage was successful and then disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.

If the authentication attempt fails, an error message appears after the authentication timeout period has expired. Refer to the “Error Messages” section on page 10-12for the necessary action to take.

After a Reboot or Logon

After your computer reboots or you log on, follow these steps to authenticate using LEAP or EAP-FAST.

Step 1 When the Windows login window appears, enter your Windows username and password and click OK.

Step 2 When the Enter Wireless Network Password window appears (see Figure 6-4), enter your LEAP or EAP-FAST username and password and click OK. The domain name can be entered in the Log On To field; it is optional.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

6-6 OL-4211-03