Pioneer DEH-P9800BT Disconnecting a cellular phone, Registering connected cellular phone

Section

08 Bluetooth Telephone

#The link code is set to 0000 as default. You can change this code in the initial setting. Refer

to Entering PIN code for Bluetooth wireless con- nection on page 98.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.

1Use MULTI-CONTROL to select Disconnect phone in the function menu. Disconnect phone, and device name of the connected phone appear in the display.

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full ad- vantage of the features available with Blue- tooth wireless technology. A total of five phones can be registered: three user cellular phones and two guest phones. When regis- tered as a user phone, all the possible func- tions are available for use. When registered as a guest phone, some functions are limited.

1Use MULTI-CONTROL to select Set phone in the function menu. Set phone appears in the display.

2Push MULTI-CONTROL up or down to select a registration assignment.

Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order:

Phone1 (user phone 1)—Phone2 (user phone 2)—Phone3 (user phone 3)—Guest1 (guest

phone 1)—Guest2 (guest phone 2)

# As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is dis- played. If the assignment is already taken, the de- vice name appears. If you want to replace an assignment with a new phone, first delete the current assignment. For more detailed instruc- tions, see Deleting a registered phone on this

page.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Press MULTI-CONTROL to register the cellular phone to this unit.

When the registration is completed, Reg. completed is displayed.

Deleting a registered phone

If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone.

!If a registered phone is deleted from this unit, the Phone Book and other settings of that phone are cleared simultaneously.

1Use MULTI-CONTROL to select Delete phone in the function menu. Delete phone appears in the display.

46 En