Pioneer DEH-P9800BT operation manual Adjusting source levels, Using auditory user interface

Audio Adjustments

#To turn ASL off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select the desired ASL level.

Each time MULTI-CONTROL is pushed left or right, ASL level is selected in the following order:

Low (low)—Mid-Low (mid-low)—Mid (mid)— Mid-High (mid-high)—High (high)

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM tuner volume level, which remains unchanged.

1Compare the FM tuner volume level with the level of the source you wish to ad- just.

2Use MULTI-CONTROL to select SLA.

SLA appears in the display.

# When selecting the FM tuner as the source, you cannot switch to SLA.

3Push MULTI-CONTROL up or down to adjust the source volume.

Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases. +4 to –4 is displayed as the source volume is increased or decreased.

Notes

!The MW/LW tuner volume level can also be adjusted with source level adjustments.

!The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

Section

14

!	External unit 1 and external unit 2 are set to	English
	the same source level adjustment volume
	automatically.

Using auditory user interface

AUI (auditory user interface) lets you adjust the volume level of AUI sounds output when operating this unit. Depending on the opera- tions, different AUI sounds are output.

!No AUI sounds are output when the sources are off.

!No AUI sounds are output when the level is set to 0.

1Use MULTI-CONTROL to select AUI sound level.

AUI sound level appears in the display.

2Push MULTI-CONTROL up or down to adjust AUI sound level.

Each time MULTI-CONTROL is pushed up or down, AUI sound level increases or decreases.

Level 0 to Level 12 is displayed as AUI sound level is increased or decreased.

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

En 89