Pioneer DEH-P9800BT operation manual Tuner Listening to the radio

Tuner

Listening to the radio

1 2 3 4 5

6

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.

This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to page 23).

1Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

2LOC indicator

Shows when local seek tuning is on.

3Band indicator

Shows which band the radio is tuned to, MW/LW or FM.

4Preset number indicator

Shows which preset has been selected.

5Frequency indicator

Shows the frequency to which the tuner is tuned.

6Signal level indicator Shows the radio wave strength.

1Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.

Section

04

2 Press BAND to select a band.	English
Press BAND until the desired band is dis-
played, FM-1, FM-2, FM-3 for FM or MW/LW.

3To perform manual tuning, push MULTI-CONTROL left or right.

The frequencies move up or down step by step.

4To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pushing

MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or

right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

En 19