Pioneer DEH-P9800BT operation manual Basic Operations, Adjusting the volume, Turning the unit off

Section

03 Basic Operations

!There is sometimes a delay between starting up CD playback and the sound being issued. When being read, Format read is displayed.

!If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.

!When the CD loading or ejecting function does not operate properly, you can eject the CD by pressing and holding EJECT while opening the front panel.

!If an error message such as ERROR-11 is dis-

played, refer to Understanding built-in CD player error messages on page 103.

Adjusting the volume

%Use MULTI-CONTROL to adjust the sound level.

With the head unit, turn MULTI-CONTROL to increase or decrease the volume.

With the remote control, press VOLUME to in- crease or decrease the volume.

Turning the unit off

%Press SOURCE and hold until the unit turns off.

18 En