Pioneer DEH-P9800BT Switching the reverse mode, Switching the Ever Scroll, Calibrating the RPMs

Initial Settings

Notes

!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

!You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off.

For more details, see Feature demo mode on page 12.

Switching the reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

1Use MULTI-CONTROL to select Reverse mode.

Reverse mode appears in the display.

2Press MULTI-CONTROL to turn the re- verse mode on.

ON appears in the display.

# To turn the reverse mode off, press MULTI-CONTROL again.

Note

You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 12.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor- mation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Use MULTI-CONTROL to select Ever-scroll.

Ever-scroll appears in the display.

Section

15

2 Press MULTI-CONTROL to turn the Ever	English
Scroll on.
ON appears in the display.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.

Calibrating the RPMs

Follow the instructions below to measure the RPM of your vehicle and records them. By doing this, the tachometer of this unit can work properly.

!Tachometer of this unit cannot work if you do not perform the RPM calibration.

!In some vehicles, the tachometer may not work properly even if you performed the RPM calibration.

1Park your vehicle in a safe place and be sure to apply the parking brake.

2Use MULTI-CONTROL to select Calibration.

Calibration appears in the display.

3Keep RPMs of the engine at 4 000 rpm and press MULTI-CONTROL.

To measure the RPM of your vehicle properly, keep RPMs of the engine at 4 000 rpm for a few seconds.

When the RPM calibration is completed,

Completed is displayed.

# Some vehicles have a rev limiter that kicks in early (e.g., 3 000 rpm) while parking. In this case,

perform RPM measurement at 2 000 rpm.

# To switch between 4000 rpm and 2000 rpm, push MULTI-CONTROL left or right.

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

En 97