Pioneer DEH-P9800BT Multi-CD Player Playing a CD, Scroll, refer to Switching the Ever Scroll on

Section

10 Multi-CD Player

Playing a CD

1 2 3

4

You can use this unit to control a multi-CD player, which is sold separately.

These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page.

1Disc number indicator

Shows the disc number currently playing.

2Track number indicator

Shows the track number currently playing.

3Play time indicator

Shows the elapsed playing time of the cur- rent track.

4Disc title indicator

Shows the title of the currently playing disc.

!If no title has been entered for the cur- rently playing disc, nothing is displayed.

1Press SOURCE to select the multi-CD player.

Press SOURCE until you see Multi-CD dis- played.

2Push MULTI-CONTROL up or down to

select a disc you want to listen to.

# You can also select a disc by using 1–6 but- tons on the remote control.

!For discs 1 to 6, press the corresponding button number.

!For discs 7 to 12, press and hold the corre- sponding numbers, such as 1 for disc 7,

until the disc number appears in the dis- play.

3To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

4To skip back or forward to another track, push MULTI-CONTROL left or right. Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start of the current track. Pushing again will skip to the previous track.

Notes

!When the multi-CD player performs the pre- paratory operations, Ready is displayed.

!If an error message such as ERROR-11 is dis- played, refer to the multi-CD player owner’s manual.

!If there are no discs in the multi-CD player ma- gazine, No Disc is displayed.

!When you select a CD TEXT disc on a CD TEXT compatible multi-CD player, the disc title auto- matically begins to scroll in the display. Ever Scroll function is ON at the initial setting, the disc title scrolls continuously. About Ever

Scroll, refer to Switching the Ever Scroll on page 97.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

1 Press DIRECT.

Track number input display appears.

2Press 0–9 buttons to enter the desired

track number.

# You can cancel the input number by pressing

CLEAR.

62 En