Pioneer DEH-P9800BT Using the auto-equalizer, Using the equalizer, Recalling equalizer curves

Section

14 Audio Adjustments

5Push MULTI-CONTROL up or down to adjust the output level of the rear speak- ers.

Each time MULTI-CONTROL is pushed up or down, the level of the rear speakers increases

or decreases. 0 to –24 is displayed as the level is increased or decreased.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre- ated by auto TA and EQ (refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 89).

You can turn the auto-equalizer on or off.

1Use MULTI-CONTROL to select Auto EQ.

Auto EQ appears in the display.

# Please set Auto EQ appears. This indicates that you cannot turn the auto-equalizer on if auto TA and EQ has not been carried out.

2Press MULTI-CONTROL to turn the auto- equalizer on.

ON appears in the display.

# To turn auto-equalizer off, press MULTI-CONTROL again.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve
Powerful	Powerful
Natural	Natural
Vocal	Vocal
Flat	Flat
Custom1	Custom 1
Custom2	Custom 2
Super Bass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a 16-band graphic equal- izer.

!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).

1Use MULTI-CONTROL to select the gra- phic equalizer adjustment.

Powerful appears in the display.

# If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of Powerful.

86 En