Pioneer DEH-P9800BT operation manual Echo canceling and noise reduction, Changing the ring tone

Bluetooth Telephone

2Push MULTI-CONTROL up or down to select a number.

Pushing MULTI-CONTROL up repeatedly changes numbers in 0 1 2 ... 9 + # * _ order. Pushing it down changes in _ * # + 9 ... 2 1 0

order.

# You can also input numbers by pressing 0–9 on the remote control.

3Push MULTI-CONTROL right to move the cursor to the next position.

When the number you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next number. Push MULTI-CONTROL left to move

backwards in the display.

# Up to 24 digits can be entered.

4If you have completed entering the number, press MULTI-CONTROL.

Call confirmation appears.

5Press MULTI-CONTROL again to make a call.

While dialing, Dialing appears in the display.

6To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Echo canceling and noise reduction

When you are operating hands-free phoning in the vehicle, you may hear undesired echo. This function reduces the echo and noise and keeps a certain sound quality.

!This feature cannot be set for each different user phone.

Section

08

1	Use MULTI-CONTROL to select	English
Echo cancel in the function menu.
Echo cancel appears in the display.
2	Press MULTI-CONTROL to turn echo can-

celing on.

ON appears in the display.

# To turn echo canceling off, press MULTI-CONTROL again.

Changing the ring tone

The unit offers you to turn the ring tone for in- coming calls on or off.

!The ring tone you select for this unit has no effect on the ring tone used by your phone. If you do not want your phone and this unit to ring at the same time, we recommend you turn the ring tone of one or the other off.

1Use MULTI-CONTROL to select Ring tone in the function menu. Ring tone appears in the display.

2Push MULTI-CONTROL left or right to select a ring tone.

Each time MULTI-CONTROL is pushed left or right, the ring tone is selected in the following order:

OFF (ring tone off)—Ring tone1 (ring tone 1)

—Ring tone2 (ring tone 2)—Ring tone3 (ring tone 3)

Note

Ring tone3 differs depending on the situation of the source (on or off).

En 55