Pioneer DEH-P9800BT operation manual Tuner Introduction of advanced tuner operation

Section

04 Tuner

Introduction of advanced tuner operation

1

1Function display Shows the function status.

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se- lect.

The function name appears on the display.

3Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL clockwise or counter- clockwise to switch between the functions in the following order:

BSM (best stations memory)—Regional (re- gional)—Local (local seek tuning)—

PTY search (program type selection)— Traffic announcement (traffic announcement standby)—Alternative FREQ. (alternative fre- quencies search)—News interrupt (news

program interruption)

# To return to the frequency display, press

BAND.

# If MW/LW band is selected, you can only se- lect BSM or Local.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

1When you find a frequency that you want to store in memory press LIST to switch to the preset channel list mode.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number; press and hold to store.

The preset number you have selected will flash and then remain lit. The selected radio

station frequency has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.

Notes

!Up to 18 FM stations, six for each of the three FM bands, and six MW/LW stations can be stored in memory.

!You can also store radio station frequencies assigned to preset tuning numbers by press-

ing and holding one of the preset tuning but- tons 1–6 on the remote control.

20 En