Pioneer DEH-P9800BT operation manual Using compression and BMX, Adjusting loudness

Section

14 Audio Adjustments

2Press MULTI-CONTROL to turn BBE on.

# To turn BBE off, press MULTI-CONTROL again.

3Push MULTI-CONTROL up or down to adjust the level of BBE.

Each time MULTI-CONTROL is pushed up or down, the level of BBE increases or decreases. +4 to –4 is displayed as the level is increased or decreased.

Note

Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc.

Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. The COMP function bal- ances the output of louder and softer sounds at higher volumes. BMX controls sound rever- berations to give playback a fuller sound. Lis- ten to each of the effects as you select through them and use the one that best en- hances the playback of the track or CD that you are listening to.

!When tuner, television or AUX is selected as a source, you cannot select COMP/BMX.

1Use MULTI-CONTROL to select COMP/BMX.

COMP/BMX appears in the display.

2Press MULTI-CONTROL to turn COMP/

BMX on.

# To turn COMP/BMX off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select the desired setting.

Each time MULTI-CONTROL is pushed left or right, settings are selected in the following

order:

COMP 1—COMP 2—BMX 1—BMX 2

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select Loudness.

Loudness appears in the display.

2Press MULTI-CONTROL to turn loudness

on.

ON appears in the display.

# To turn loudness off, press MULTI-CONTROL again.

Using automatic sound levelizer

During driving, noise in the car changes ac- cording to the driving speed and road condi- tions. The automatic sound levelizer (ASL) monitors such varying noise and automati- cally increases the volume level, if this noise becomes greater. The sensitivity (variation of volume level to noise level) of ASL can be set to one of five levels.

1Use MULTI-CONTROL to select ASL. ASL appears in the display.

2Press MULTI-CONTROL to turn ASL on. ASL level (e.g., Mid-Low) appears in the dis- play.

88 En