Pioneer DEH-P9800BT operation manual TV tuner Introduction of advanced TV tuner operation

Section

12 TV tuner

Introduction of advanced TV tuner operation

1

1Function display Shows the function status.

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

BSSM appears on the display.

# To return to the channel display, press BAND.

Note

If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Storing and recalling broadcast stations

You can easily store up to 12 broadcast sta- tions for later recall.

1When you find a station that you want to store in memory press LIST to switch to the preset channel list mode.

2Use MULTI-CONTROL to store the se- lected station in memory.

Turn to change the preset number; press and hold to store.

The preset number you have selected will flash and then remain lit. The selected station

has been stored in memory.

# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.

Notes

!Up to 24 stations, 12 for each of two TV bands, can be stored in memory.

!You can also store stations assigned to preset tuning numbers 1–6 by pressing and holding

one of the preset tuning buttons 1–6 on the re- mote control.

Storing the strongest broadcast stations sequentially

1Use MULTI-CONTROL and select FUNCTION to display BSSM.

2Press MULTI-CONTROL to turn BSSM

on.

Searching is displayed. While Searching is displayed, the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, the preset channel list ap-

pears.

# To cancel the storage process, press

MULTI-CONTROL.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

74 En