Pioneer DEH-P9800BT Initial Settings, Setting the clock, Turning the off clock display on or off

Section

15 Initial Settings

3Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing

MULTI-CONTROL down will decrease the se- lected day, month or year.

Setting the clock

Use these instructions to set the clock.

1Use MULTI-CONTROL to select Clock. Clock appears in the display.

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display the segment selected will blink.

!Even when the sources are off, the clock dis- play appears on the display. Pressing CLOCK

when the sources and feature demo are off, turns the clock display on or off.

Turning the off clock display on or off

If the off clock display is turned on, when the sources and the feature demo are off, the ca- lendar and the clock display appears on the display.

1Use MULTI-CONTROL to select Off clock.

Off clock appears in the display.

2Press MULTI-CONTROL to turn the off clock display on.

ON appears in the display.

# To turn the off clock display off, press MULTI-CONTROL again.

3Push MULTI-CONTROL up or down to set the clock.

Pushing MULTI-CONTROL up will increase the selected hour or minute. Pushing MULTI-CONTROL down will decrease the se- lected hour or minute.

Notes

!You can match the clock to a time signal by pressing MULTI-CONTROL.

—If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

—If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

1Use MULTI-CONTROL to select FM tuning step.

FM tuning step appears in the display.

2Press MULTI-CONTROL to select the FM tuning step.

Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will appear in the display.

94 En