G5 OPERATION MANUAL
BASIC RADIO OPERATION continued
When listening to FM or shortwave,fully extend the telescopic antenna (44). It need not be extended when listening to AM stations (the AM antenna is located inside the G5).
LISTENING IN FM STEREO
FM stereo can be heard when using earphones/headphones (47) or when routing the audio to a stereo amplification device from the ‘LINE OUT’ socket (43). To hear FM in stereo, press the ‘ST/MONO’ button (8) while tuned to a FM station. Note that ‘STEREO’ appears in the display (38) when the stereo mode is selected.
SETTING UP AM AND FM OUTSIDE OF NORTH AMERICA
NOTE: The G5 is factory
In North America, AM stations are spaced by 10 KHz and the AM band extends from 520 kHz to 1710 kHz. In most other world areas, they are spaced by 9 KHz and the band extends from
1.Turn off the G5.
2.Press the F5 button for about 3 seconds, or until ‘9’ or ‘10’ flashes in the display.
3.Release the button and give it a quick, short press to toggle to the other setting.
4.When finished, press the ‘PAGE/TIME’ button (4) twice.
BASIC RADIO OPERATION continued
In North America, the FM band extends from
1.Turn off the G5.
2.Press the F5 button for about 3 seconds, or until ‘9’ or ‘10’ flashes in the display.
3.Release the button and give the PAGE/TIME button (4) a quick, short press.
4.Sequentially press the F5 button until the beginning FM frequency of your area appears.
5.Give the PAGE/TIME button (4) a quick, short press.
TUNING IN STATIONS
Described below are four methods of
BUTTONS (6)
Quick, short, sequential presses of the buttons enables tuning up or down frequency (33)(34)(35). All normaltuning for AM, FM and
shortwave stations can be performed with the buttons.The tuning steps used are 9 or 10 kHz in the AM band, 5 kHz in the shortwave bands and 100 kHz in the FM band.
TUNING KNOB (40)
The tuning steps are 1 kHz in AM/SW and 25 kHz FM.
16 | 17 |
