Eton G5 Clock and Alarm Features, Time Zone Abbreviation List, Setting the Clock and Weekday

G5 OPERATION MANUAL

CLOCK AND ALARM FEATURES continued

TIME ZONE ABBREVIATION LIST

ANC-Anchorage	HNL-Honolulu
BEG-Beijing	JED-Jeddah
BKK-Bangkok	KHI-Kashi
CAI-Cairo	LAX-Los Angeles
CCS-Caracas	LON-London
CHI-Chicago	NOU-Noumea
DAC-Dhaka	NYC-New York City
DEL- Delhi	PAR-Paris
DEN-Denver	RIO-De Janeiro
DXB-Dubai	SYD-Sydney
GMT-GMT	TYO-Tokyo
HKG-Hong Kong	WLG-Wellington

SETTING THE CLOCK AND WEEKDAY:

In the clock set procedure below, while the hour or minute digits flash in steps 2 or 4, press one of the buttons 1-7 to select the day of the week (32). The ‘1’ button represents Sunday. The selected weekday will then be within a box.

1.Press the PAGE/TIME button (4) for about 2 seconds or until the hour digits (29) start flashing.

2.Within 3 seconds, use the tuning knob (40) to set the correct hour.

3.Give the PAGE/TIME button a quick, short press, noting that the minute digits (29) start flashing.

4.Within 3 seconds, use the tuning knob to set the correct minutes.

5.Allow the minutes to stop flashing. The clock is set.

CLOCK AND ALARM FEATURES continued

To view other time zones:

This allows viewing other time zones without changing the home time zone.

1.Quick, short press of TIME ZONE button. ‘Tzone’ appears in the display.

2.Use tuning knob to select desired time zone. Once selected, that time zone’s time appears in the display for about 30 seconds.

3.To exit T-zone mode earlier, use a quick, short press of the TIME ZONE button.

SETTING THE ALARMS 1 THROUGH 4 (20-23)

Alarms can be set with the G5 turned on or off.

The G5 has 4, independently programmable alarm timers (buttons F1-

4)to turn it on at a specified time. Additionally, each timer can be programmed for a specific weekday, volume, playtime and memory location.

To set an alarm:

In the procedure below, while setting hour or minutes, pressing one of the 1-7 buttons selects/deselects the day of the week for the alarm to activate. While the digits are flashing a box will appear around the selected day of the week. The box will disappear once set mode is fin- ished, with the box then surrounding only the current day of the week.

1.With the G5 turned off, perform a long press of one of the F1-4 buttons (about 3 seconds), causing the hour to flash.

2.Use the tuning knob to set the hour.

24 25