Pioneer DEH-P9800BT operation manual Entering PIN code for Bluetooth wireless connection

Section

15Initial Settings

1Use MULTI-CONTROL to select

BT AUDIO.

BT AUDIO appears in the display.

2Press MULTI-CONTROL to turn the BT Audio source on.

ON appears in the display.

# To turn the BT Audio source off, press MULTI-CONTROL again.

4After inputting PIN code (up to 16 di- gits), press MULTI-CONTROL.

PIN code you entered is now standby to be stored in memory.

When you press MULTI-CONTROL again on the same display, the PIN code you entered is

stored in this unit.

# Pusing MULTI-CONTROL right in the confir-

mation display returns you to the PIN code input display, and you can change the PIN code.

Entering PIN code for Bluetooth wireless connection

To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.

!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

1Use MULTI-CONTROL to select Pin code input.

Pin code input appears in the display.

2Push MULTI-CONTROL up or down to select a number.

Pushing MULTI-CONTROL up or down changes the number.

3Push MULTI-CONTROL right to move the cursor to the next position.

When the number you want is displayed, push MULTI-CONTROL right to move the cursor to the next position and then select the next number. Push MULTI-CONTROL left to move backwards in the display.

Resetting the Bluetooth wireless technology module

Should you need to, you can reset the built-in Bluetooth wireless technology module. This will also clear all memories set in the tele- phone source, including Phone Book entries, number presets, registration assignments and the Call History.

For instruction on this operation, refer to Clear- ing all memory on page 11.

98 En