Pioneer DEH-P9800BT operation manual Switching Auto PI Seek, Switching the warning tone

Initial Settings

Note

The tuning step remains at 50 kHz during manual tuning.

Switching Auto PI Seek

The unit can automatically search for a differ- ent station with the same programming, even during preset recall.

1Use MULTI-CONTROL to select Auto PI seek.

Auto PI seek appears in the display.

2Press MULTI-CONTROL to turn Auto PI seek on.

ON appears in the display.

# To turn Auto PI seek off, press MULTI-CONTROL again.

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

1Use MULTI-CONTROL to select Warning tone.

Warning tone appears in the display.

2Press MULTI-CONTROL to turn warning tone on.

ON appears in the display.

# To turn warning tone off, press MULTI-CONTROL again.

	Section
	15
	English
Switching the face auto open

For theft protection, the front panel opens automatically and easily detaches. Face auto open is on as a default.

1Use MULTI-CONTROL to select Face auto open.

Face auto open appears in the display.

2Press MULTI-CONTROL to turn the face auto open on.

ON appears in the display.

# To turn the face auto open off, press MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 99.

1Use MULTI-CONTROL to select AUX1/ AUX2.

AUX1/AUX2 appears in the display.

2Press MULTI-CONTROL to turn AUX1/ AUX2 on.

ON appears in the display.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.

1Use MULTI-CONTROL to select Dimmer. Dimmer appears in the display.

En 95