Pioneer DEH-P9800BT operation manual Receiving traffic announcements, Using PTY functions

Section

05 RDS

Notes

!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

!The preset number may disappear on the dis- play if the tuner tunes in a regional station which differs from the originally set station.

!The regional function can be turned on or off independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1Tune in a TP or enhanced other net- work’s TP station.

2Press TA to turn traffic announcement standby on.

Press TA and TA ON appears in the display. The tuner will stand-by for traffic announce-

ments.

# To turn traffic announcements standby off, press TA again.

3Use MULTI-CONTROL to adjust the TA volume when a traffic announcement be- gins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

4Press TA while a traffic announcement is being received to cancel the announce- ment.

The tuner returns to the original source but re- mains in the standby mode until TA is pressed

again.

# You can also cancel the announcement by pressing SOURCE, BAND or MULTI-CONTROL while a traffic announcement is being received.

Notes

!When a traffic announcement is received, traf- fic announcement interruption screen is dis- played.

!You can also turn the TA function on or off in the menu that appears by using

MULTI-CONTROL.

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Using PTY functions

You can tune in a station by using PTY (pro- gram type) information.

Searching for an RDS station by PTY information

You can search for general types of broadcast- ing programs, such as those listed on page 27.

1Use MULTI-CONTROL to select PTY search in the function menu. PTY search appears in the display.

24 En