Pioneer DEH-P9800BT operation manual Audio Adjustments Introduction of audio adjustments

Audio Adjustments

Introduction of audio adjustments

1

Important

When phone is selected as a source, no audio ad- justments, except balance adjustment, are possi- ble.

1Audio display

Shows the audio adjustment status.

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option; press to se- lect.

The audio function name appears on the dis- play.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL clockwise or counter- clockwise to switch between the audio func- tions in the following order:

Fader (balance adjustment)—Position (posi- tion selector)—TA Mode (time alignment set- ting)—Time Alignment (time alignment adjusting)—Loudness (loudness)—Powerful (graphic equalizer adjustment)—FREQ. (16- band graphic equalizer adjustment)— Subwoofer1 (subwoofer on/off)— Subwoofer2 (subwoofer cut-off frequency)— Subwoofer3 (subwoofer slope)—Front HPF

(front high pass filter slope)—

Front HPF FREQ. (front high pass filter cut-off frequency)—Rear HPF (rear high pass filter slope)—Rear HPF FREQ. (rear high pass filter cut-off frequency)—BBE (BBE)—COMP/BMX (Compression and BMX)—Auto EQ (auto- equalizer on/off)—ASL (automatic sound leve- lizer)—SLA (source level adjustment)—

AUI sound level (auditory user interface)

#When selecting OFF in TA Mode, you cannot switch to Time Alignment.

#You can select Subwoofer2 and Subwoofer3 only when subwoofer output is turned on in Subwoofer1.

#When tuner, television or AUX is selected as a source, you cannot select COMP/BMX.

#When selecting the FM tuner as the source, you cannot switch to SLA.

#To return to the display of each source, press BAND.

Note

If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.

Section

14

English

En 81