Removing the front panel

1 Press and hold EJECT to open the front
panel.
2 Slide and remove the front panel to-
ward you.
Takecare not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent perma-
nent damage.
3 Put the front panel into provided pro-
tective case for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.
2 Replace the front panel by clipping it
into place.
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
Important
Thered lead(ACC) of thisunit should be con-
nectedto a terminal coupled with ignition switch
on/offoperations. If this is not done, the vehicle
battery may be drained.

Reverse mode

If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. PressingBAND when power to this
unit is turned off while the ignition switch is
set to ACC or ON cancels the reverse mode.
PressBAND again to start the reverse mode.

Feature demo mode

The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Pressing
DISPLAYduring feature demo operation can-
cels the feature demo mode. Press DISPLAY
again to start the feature demo mode. Remem-
ber that if the feature demo continues operat-
ing when the car engine is turned off,it may
drain battery power.
Before YouStart
En
12
Section
01