Radio Shack ET-1111 owner manual Connecting And Charging The Battery Pack

43-1111.fm Page 8 Tuesday, June 29, 1999 3:38 PM

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Route the adapter and modular cords through the grooves on the bottom of the base.

4.Align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.

1.Press down and slide off the battery pack compartment cover as shown.

2.Lift the battery pack out of the com- partment.

3.Plug the battery pack’s connector in- to the socket in the compartment (the connector fits only one way).

4. Replace the cover.

To charge the battery pack, place the handset either faceup or facedown on the base. The CHARGE/IN USE indica- tor on the base lights and Total:00 appears on the handset display.

CONNECTING AND CHARGING THE BATTERY PACK

The ET-1111 comes with a recharge- able Ni-Cd battery pack in the handset but not connected. Before using your phone, you must connect the battery pack, then charge it for about 24 hours.

8

Recharge the battery pack when the handset beeps every 3 seconds and Low Battery flashes on the display during a call. You cannot make another call until you recharge the battery pack.