For each stored number, write the per- son’s or company’s name next to the ap- propriate location number on the supplied memory directory sticker. Peel the backing from the sticker and attach it to the phone as shown.
To replace a stored number, simply store a new one in its place.
Editing or Deleting a Number in Memory
Follow these steps to edit or delete a memory number.
1.Lift the handset.
2.Hold down MEM until Memory Store and a list of memory loca- tion numbers appear on the display.
3.Choose a memory location 
.
4.Press SELECT. A menu appears with the three options listed below. Press 
to choose an option, follow the instructions listed, then press
SELECT.
Edit Memory n. Edit the record as described in Steps 5 through 8 of “Storing a Name and Number in Memory” on Page 13.
Delete Memory n. The display prompts you to confirm the deletion. Move the cursor to Yes or No, then press SELECT or DELETE. The phone beeps, and Memory n De- leted appears.
Go Back. Returns you to the list of memory numbers.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect. To en- ter a
Reviewing Memory Numbers
To review your memory numbers, press MEM. The list of memory location num- bers
15
