TELEPHONE OPERATION
MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK (the CHARGE/IN USE indi- cator on the base lights), then dial the number. You view the number as you di- al, then (after a few seconds) the call’s elapsed time.
Notes:
•You can also dial the number before you press TALK.
•If you make a mistake, press DE- LETE to remove the incorrect digits, then enter the correct number.
•To delete the entire number, press and hold DELETE for about 1 sec- ond.
To answer a call, lift the handset from the base and press TALK. If auto talk is on, just lift the handset from the base, or, if the handset is away from the base, press any key.
To end a call, place the handset on the base or press TALK.
USING REDIAL
You can quickly dial the last number di- aled. Lift the handset and press TALK, then press REDIAL/PAUSE.
Notes:
•You can also press REDIAL/PAUSE (so you view the stored number) first, then press TALK.
•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.
•The redial memory also holds pause entries. See “Entering a Pause” on Page 15.
USING FLASH
Flash performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.
ADJUSTING THE HANDSET VOLUME
TALK
To adjust the volume of the sound you hear through the handset during a call, press 
or 
. You can adjust the hand- set volume to Volume Low, Volume Medium, Volume High, or Volume Maximum.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
12
