43-1111.fm Page 10 Tuesday, June 29, 1999 3:38 PM

2.Lift the handset, press TALK, and listen for a dial tone.

TA LK

3.Press any number other than 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not dial the access code either.

If the dial tone stops, you have touch-tone service. Leave PULSE/ TONE set to TONE.

If the dial tone continues, you have pulse service. Set PULSE/TONE to

PULSE.

SETTING THE RINGER’S VOLUME

Lift the handset from the base or leave the handset faceup on the base. Press or (except during a call) to set the ringer volume. The phone rings at the selected volume and the display shows Ringer High or Ringer Low.

10

SETTING AUTO TALK

Your phone is preset so you must press TALK to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base, or, if the handset is away from the base, by pressing any key.

Follow these steps to turn auto talk on or off.

1.Lift the handset and press FUNC- TION. A menu appears with Auto Talk selected.

2.Press SELECT to change the auto talk setting. On or Off appears indi- cating the selected setting.

3.To clear the display when you finish, press FUNCTION or return the hand- set to the base.

TURNING CALLER ID/ CALL WAITING ON/OFF

If you have Call Waiting with Caller ID service, you can set the ET-1111 to show Caller ID information for an incom- ing call even while you are already on the phone.

Page 10
Image 10
Radio Shack ET-1111 owner manual Setting the RINGER’S Volume, Setting Auto Talk, Turning Caller ID/ Call Waiting ON/OFF