To view the stored phone numbers, press 
. An arrow to the right of the number means it is longer than 14 digits.
Press 
again to view the rest of the
number. Repeatedly press 
to return to the name display.
To exit the memory number list, press MEM.
To view a stored name and phone num- ber at the same time, press SELECT when the cursor is by a memory location number. To exit this display, hold down DELETE until the display clears.
Dialing a Memory Number
To dial a number stored in memory, lift the handset and press MEM. The list of memory location numbers appears. Choose a memory location 
or 
, then press TALK.
You can also dial a memory number by pressing TALK first, then pressing MEM and entering a memory location number.
Chain-Dialing Service Numbers
For quick recall of numbers for special services (such as bank by phone), store each group of numbers in its own mem- ory location.
Dial the service’s main number first. Then, at the appropriate place in the call, press MEM and enter the number for the location where the additional in- formation is stored.
16
Testing Stored Emergency Numbers
If you store an emergency service’s number (police department, fire depart- ment, ambulance) and you choose to test the stored number, make the test call during the late evening or early morning hours to avoid peak demand periods. Also, remain on the line to ex- plain the reason for your call.
USING A HEADSET
You can make or answer calls with
mm)plug. Contact your local Ra- dioShack store for a suitable headset.
To connect the headset, pull open the rubber cover marked 
on the side of the handset, then insert the headset’s plug into the jack.
Notes:
•Connecting a headset disconnects the handset’s earpiece and micro- phone.
•
or 
on the handset also controls the headset’s volume.
