Pioneer DEH-P88RS operation manual About the network function, Adjusting the time alignment

Section

12 Audio Adjustments

Initial (initial)—Custom (custom)—AutoTA

(auto-time alignment)—OFF (off)

!Initial is the factory supplied time align- ment.

!Custom is an adjusted time alignment that you can create for yourself.

!AutoTA is the time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 67.)

#Please set Auto TA appears. This indicates that you cannot select AutoTA if auto TA and EQ has not been carried out.

Adjusting the time alignment

You can adjust the distance between each speaker and the selected position.

!An adjusted time alignment is memorized in Custom.

1Use MULTI-CONTROL to select TA 1. TA1 appears in the display.

2Press MULTI-CONTROL to select a unit of distance.

Each press of MULTI-CONTROL selects the unit of distance in the following order: (cm) (centimeter)—(inch) (inch)

3Use MULTI-CONTROL to select TA2.

TA2 appears in the display.

# Can't Adjust TA. Set POS FL/FR appears when neither Front Left nor Front Right is se-

lected in the position selector mode (POSI).

# When selecting OFF in TA1, you cannot switch to TA2.

4Push MULTI-CONTROL left or right to select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order:

Hi L (high-range left)—Hi R (high-range right)

—Mid L (middle-range left)—Mid R (middle- range right)—Low L (low-range left)—Low R (low-range right)

Front L (front left)—Front R (front right)— Rear R (rear right)—Rear L (rear left)— SubW. L (subwoofer left)—SubW. R (subwoo- fer right)

#You cannot select SubW. L and SubW. R when the subwoofer output is off.

5Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases. 400.0cm to 0.0cm is displayed as the distance is increased or decreased, if you have selected centimeters ((cm)).

160inch to 0inch is displayed as the distance is increased or decreased, if you have selected

inches ((inch)).

# You can adjust the distance for the other speakers in the same way.

6Press BAND to cancel the time align- ment mode.

About the network function

The network function lets you divide the audio signal into different frequency bands, and then reproduce each of them through sepa- rate speaker units.

58 En