Playing songs on iPod
Listening to songs on your iPod
1
2
You can use this unit to control an iPod adapter, which is sold separately.
These are the basic steps necessary to operate an iPod adapter. More advanced iPod adapter operation is explained starting on Introduction of advanced iPod adapter operation on page 45.
1Song number indicator
Shows the number of song played in the se- lected list.
2Play time indicator
Shows the elapsed playing time of the cur- rent song.
1Press SOURCE to select the iPod. Press SOURCE until you see iPod displayed.
2To perform fast forward or reverse, push and hold
3To skip back or forward to another song, push
of the current song. Pushing again will skip to the previous song.
|
| Section |
|
| 09 |
|
| English |
Browsing for a song |
The operation of this unit to control an iPod is designed to be as close to the operation of the iPod as possible for easy operation and song search.
1Turn
top menu of the list search.
# You can also perform this operation by press- ing joystick on the remote control.
2Use
Turn to change the category; press to select. Playlists
List from the selected category is displayed.
# You can start playback throughout the se- lected category by pressing and holding
MULTI-CONTROL.
# You can also change the category by pushing
# You can also select the category by pushing
# To return to the previous list, push
# To go to the top menu of the list search, push
and hold
# If you do not operate the list within about 30 seconds, the list search is cancelled automati- cally.
Searching for a song
1Turn
top menu of the list search.
# You can also perform this operation by press- ing joystick on the remote control.
2Use
Turn to change the category; press to select.
En 43