Pioneer DEH-P88RS Audio Adjustments Recalling equalizer curves, Adjusting equalizer curves

Audio Adjustments

Recalling equalizer curves

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve
Powerful	Powerful
Natural	Natural
Vocal	Vocal
Flat	Flat
Custom 1	Custom 1
Custom 2	Custom 2
Super Bass	Super bass

!Custom 1 and Custom 2 are adjusted equalizer curves that you create. Adjust- ments can be made with a 16-band graphic equalizer.

!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers:

Super Bass—Powerful—Natural—Vocal— Flat—Custom 1—Custom 2

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).

Section

12

1 Use MULTI-CONTROL to select EQ 1.	English
EQ 1 appears in the display.
2 Push MULTI-CONTROL left or right to
select an equalizer curve.
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each time MULTI-CONTROL is pushed up or
down, the equalizer curve increases or de-
creases respectively.
+6 to –6 is displayed as the equalizer curve is
increased or decreased.
# The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.

Adjusting 16-band graphic equalizer

For Custom 1 and Custom 2 equalizer curves, you can adjust the level of each band.

!A separate Custom 1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automati- cally.) If you make adjustments when a curve other than Custom 2 is selected, the equalizer curve settings will be memorized in Custom 1.

!A Custom 2 curve can be created common to all sources. If you make adjustments when the Custom 2 curve is selected, the Custom 2 curve will be updated.

1Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on this page.

2Use MULTI-CONTROL to select EQ 2. EQ 2 appears in the display.

En 65