Built-in CD Player
Displaying disc titles
You can display the text information of any disc that has had a disc title entered.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings:
Play
Using CD TEXT functions
Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these spe- cially encoded CD TEXT discs support the functions listed below.
Displaying text information on CD TEXT discs
You can display the text information of any disc that has had a disc title entered.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between the following settings:
Play
disc artist name and play
and play
#If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.
Scrolling text information in the display
This unit can display the first 14 letters of disc title, disc artist name, track title and track ar-
Section
06
tist name. When the text information is longer | English |
| |
than 14 letters, you can scroll the text informa- |
|
tion as follows. |
|
%Press DISPLAY and hold until the text information begins to scroll through the display.
Note
When Ever Scroll is set to ON at the initial setting, CD text information scrolls continuously in the display. If you want to display the first 14 charac- ters of text information temporarily and scroll from the beginning, press and hold DISPLAY. Refer to Switching the Ever Scroll on page 74.
Selecting tracks from the track title list
Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.
1Turn
track title list mode.
# You can also perform this operation by press- ing joystick on the remote control.
2Use
Turn to change the track title; press to play.
# You can also change the track title by pushing
# If you do not operate the list within about 30
seconds, the track title list mode is canceled automatically.
En 29