![](/images/new-backgrounds/1321449/32144927x1.webp)
Section
03
Basic Operations
Turning the unit on
%Press SOURCE to turn the unit on.
When you select a source, the unit is turned on.
terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.
Selecting a source
You can select a source you want to listen to. To switch to the
%Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources:
Notes
!In the following cases, the sound source will not change:
—When there is no unit corresponding to the selected source connected to this unit.
—When there is no disc in the unit.
—When there is no disc in the DVD player.
—When there is no magazine in the multi- CD player.
—When there is no magazine in the multi- DVD player.
—When the AUX (auxiliary input) is set to off (refer to page 72).
!External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter- nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.
!When this unit’s blue/white lead is connected to the vehicle’s
Loading a disc
1Press EJECT to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE to select the
2Insert a CD into the CD loading slot. Front panel is closed automatically, and play- back will start.
CD loading slot
#You can eject a CD by pressing EJECT.
Notes
!The
!Do not insert anything other than a CD into the CD loading slot.
!There is sometimes a delay between starting up CD playback and the sound being issued. When being read, Format read is displayed.
!If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again.
14
En