Section
04 
Tuner
Listening to the radio
1 2 | 34 5 |
6
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to page 20).
1Band indicator
Shows which band the radio is tuned to, MW/LW or FM.
2Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
3Preset number indicator
Shows which preset has been selected.
4LOC indicator
Shows when local seek tuning is on.
5Signal level indicator Shows the radio wave strength.
6Frequency indicator
Shows the frequency to which the tuner is tuned.
1Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed.
2 Press BAND to select a band.
Press BAND until the desired band is dis- played,
3To perform manual tuning, push
The frequencies move up or down step by step.
4To perform seek tuning, push and hold
The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
# If you push and hold
right you can skip stations. Seek tuning starts as soon as you release 
16
En
